Product Description
Overview
A
Description
1
Filter housing
2
Suction socket G2 (inlet)
3
Pressure socket G2 (outlet)
4
Pump casing
5
Switch for switching on/off the dynamic function
6
Connection line, plug connector
7
Switching power pack of the pump
8
Stand
9
38 mm hose connector
10
50 mm hose connector
11
Union nut G2 for fastening the hose connector
12
Flat seal 45 × 33 × 3 mm for hose connector
13
Hose clip 40 ... 60 mm
EGC-IN
EGC connection
EGC-OUT
Important: Moisture in the EGC connection will damage the pump.
Easy Garden Control System (EGC)
This product can communicate with the Easy Garden Control-System (EGC). EGC al-
lows convenient control in the garden and pond via smartphone or tablet, and en-
sures maximum convenience and reliability. Information about EGC and the possibil-
ities it offers can be found at www.oase.com/egc-start.
Dynamic function
Numerous values for flow rates have been pre-programmed in the pump control sys-
tem to create a dynamic fountain with changing heights and diameters. If the dy-
namic function is activated, the pump is continuously controlled with these values.
20
• Prevents intake of coarse dirt and leaves in a submersed position
• Ensures secure and stable positioning of the pump
• Can be firmly bolted to the ground
• Connection for the OASE Eco Control or for integration in an EGC network.
• Always close the connection (with a protective cap or the EGC plug).
• Ensure that the rubber seal is clean and fits exactly. Replace the rubber seal if it
is damaged.