Integrating The Pump In The Egc Network; Switching On/Off - Oase Aquarius Eco Expert Instrucciones De Uso

Integrating the pump in the EGC network

You can integrate the pump in an EGC network. In an EGC network, the control sys-
tem InScenio FM-Master EGC or InScenio EGC-Controller and all EGC-compatible
units are connected with each other via Connection Cable EGC.
• The EGC connection cable is available as an accessory in the lengths 2.5 m (47038),
5 m (47039) and 10 m (47040).
• If the pump is integrated in an EGC network, connecting Eco Control is not possi-
ble.
 For information on connection and operation, refer to the operating manual of
the OASE InScenio FM-Master EGC or InScenio EGC Controller system.
Commissioning/start-up
NOTE
Never connect the pump to a dimmer. Otherwise the pump will be destroyed.

Switching ON/OFF

• Switching on: Plug the power plug into the outlet.
– The unit switches on immediately.
• Switching off: Pull the power plug from the outlet.
EN
EGC0009
EGC0003
25