Boston Scientific SC-5270 Instrucciones De Uso página 29

Link to Stimulator? screen does not automatically display, you can manually initiate
If the
Clinician Menu.
linking from the
2. From the Clinician Menu, select
displays.
3. If the desired Stimulator has not been located, select
Note: Stimulators that utilize communication must be in Pairing Mode in order to appear on
the Stimulator Search screen and link.
4. Select the Stimulator that you wish to link to. The
with the Stimulator serial number. A Remote Control that is intended to be utilized by the patient
at home should be linked as the Patient Remote. Selecting
with the Stimulator for use in the clinic.
Yes to link as Patient Remote to the Stimulator.
5. Select
or
Select No to temporarily link to the Stimulator for use in the clinic or to cancel the action.
Accessing the Clinician Menu
Stimulator Search. The Stimulator Search screen
Rescan.
Link as Patient Remote? screen displays
No will create a temporary link
Clinician Remote Control Directions for Use
92395488-02 25 of 1077