Mri Mode; Enabling Mri Mode - Boston Scientific SC-5270 Instrucciones De Uso

MRI Mode

A patient implanted with an MR Conditional System for Spinal Cord Stimulation (SCS) can undergo an
MR Conditional Scan when all instructions listed in the ImageReady™ Full Body MRI Guidelines for
WaveWriter Alpha and WaveWriter Alpha Prime SCS Systems are followed. Contact Boston Scientific
Technical Support or go to www.bostonscientific.com/manuals for the latest version of this manual.

Enabling MRI Mode

When the Remote Control is linked to an MR Conditional Stimulator, the Enter MRI Mode icon
appear on the System Settings screen. The Remote Control must be used to enable MRI Mode on the
Stimulator before performing an MRI scan on a patient. The stimulation therapy is automatically turned
OFF when MRI Mode is enabled.
Warning:
Do not perform an MRI scan if MRI Mode is not enabled. Scanning under different
conditions may result in patient injury or device malfunction.
To enable MRI Mode:
1. Unlock the Remote Control by pressing the Lock/Unlock
Remote Control.
2. After unlocking the Remote Control, the Home screen appears.
Note: The Remote Control may display either a text screen in one of the languages provided or
an iconic screen.
3. Press the Right Arrow button to navigate to the
button on the right side of the
Main Menu.
Clinician Remote Control Directions for Use
92395488-02
MRI Mode
will
29 of 1077