Assembly P; The Wheels P; The Frame P - Mutsy 4Rider Manual De Instrucciones

Pushchair
· The paintwork does not require any
maintenance, but is more susceptible
to damage due to bumps or scrat-
ching than chrome. Please take this
into account when transporting the
pushchair in a car.
· You can put acid-free Vaseline onto the
chrome parts in order to prevent cor-
rosion.
· Never lubricate the wheels with oil. If
you clean the axles and treat them with
acid-free Vaseline regularly, the wheels
will continue to run smoothly.
· You can also treat the other moving
parts with Teflon spray (dry lubricant).
After spraying on the Teflon, wipe the
product with a soft cloth.
· It is particularly important to ensure
that the locking mechanism and swi-
velling mechanism are treated regularly
with Teflon spray (dry lubricant).
· The frame tubes covered by the lock-
ing mechanism and turning mechanism
should also be regularly cleaned and
sprayed. This will ensure that you enjoy
your pushchair without any problems.
Assembly
Contents of the box
· 1 frame with basket
· 4 wheels (2 front wheels / 2 rear wheels)
Order of assembly:
· Assemble rear wheels (1)
· Assemble front wheels (2)
· Release frame lock at left hand
side (3)
· Unfold frame (4)
The wheels
Assemble the rear wheels (a)
· The frame should be fitted with 2 front
wheels and 2 rear wheels. The rear
wheels have a brake rim.
· In order to install the rear wheels, push
in the central tip of the wheel, then
position the wheel axle into the tube.
You can let go of the tip when you hear
a click, which means that the wheel
has been secured correctly.
Assemble the front wheels (b)
· In order to assemble the front wheels,
first move the slider button back, which
will allow you to position the vertical
wheel axle into the plastic front chock.
Do not let go of the slider button until
the front wheel axle is positioned all
the way into the front chock. The front
wheel is now locked.
Disassemble the rear wheels (c)
· Remove the rear wheels by pushing in
the central tip of the wheel and taking
the wheel axle out of the tube.
Disassemble the front wheels (d)
· Remove the front wheels by pushing
back the slider button and taking the
wheel axle out of the tube.
· Tip : (only for tyres of 4Rider single spoke
version) the tyres have car tyre valves.
Tyre pressure can be modified depend-
ing on the weight of the child. For
lighter children there should be less air
in the tyres for better comfort.
! Tyre pressure must not exceed 20 psi/
1.4 Bar (only for tyres of 4Rider single
spoke version) .
The frame
Unfolding the frame (c)
· Release frame lock at the left hand side.
· Set frame to brake position or position
your foot on the bottom frame.
· Push the push handle up until you can
hear a click.
! Always check whether the pushchair
has been correctly unfolded and locked
before use.
Fold in the frame (f)
· Set frame to brake position or position
your foot on the bottom frame.
· Push in the height adjustment button
on the push bar, pull the safety
handle at the left hand side towards
you and simultaneously push forward
the pushbar until the frame folds in.
When the frame is entirely horizontal,
the frame lock is automatically acti-
vated.
Store the frame upright
· If the frame lock is activated and the
swivel wheels have been blocked, then
the frame can be stored upright.
English
17