User Tips; Maintenance P; Assembly P; Wheels P - Mutsy Transporter Manual De Instrucciones

applied before placing the child in the
stroller.
· The Mutsy Transporter is approved to
EN1888 2003, A1, A2, A3.
· The Mutsy Transporter is approved ac-
cording to the ASTM F833-08 standard.

user tips

· Use only original Mutsy accessories.
· Do not modify the product in any way.
· In the event of any complaints or prob-
lems, please contact your supplier or
importer.
· All references to left and right are as
seen from the point of view of a user
positioned behind the stroller.
· Because of the materials used in the
tyres they may leave marks on certain
surfaces.
Maintenance
Fabrics
· All Mutsy fabrics are carefully tested,
but there is a risk that if the stroller
gets very wet the moisture may get
into the lining through the lower ed-
ges and seams and leave rings on the
coverings. In order to prevent this we
recommend the use of a rain cover.
· The linings and the slip-on covers
can be hand washed using a deter-
gent for delicates (no hotter than
30°C).
! Do not wash in a washing machine or
dry in a dryer.
· Spotting on the inner or outer cover-
ings can be treated with a solution of
bleach-free liquid detergent. Always
treat the entire panel. If the stroller
is wet it should be put away with the
hood under tension.
· While Mutsy fabrics are selected with
the greatest possible care and tested
for colourfastness, the material may
still become discoloured. Mutsy will
not accept any liability for any disco-
louration.
carriage
· Never lubricate the wheels with oil.
The wheels will continue to run freely
simply by keeping the axles clean and
applying acid-free Vaseline
· The remaining moving parts may be
sprayed with Teflon dry lubricant and
wiped with a soft dry cloth.
· Apply a little acid-free Vaseline to the
chrome work if necessary to prevent
corrosion.
· Take particular care to lubricate the
locking and swivel mechanisms with
Teflon dry lubricant spray. This will en-
sure problem-free use of your stroller.
assembly
contents of the box
- 1 frame with basket
- 1 seat with hood
- 4 wheels (2 front and 2 rear)
assembly sequence:
- Fold out frame
- Assemble rear wheels
- Assemble front wheels
Wheels
assembly and dismantling of the rear
wheels
· Two rear wheels are to be fitted to the
frame. The rear wheels include a brak-
ing rim.
· The central cap on the wheel must be
depressed to allow the rear wheel to be
fitted, after which the wheel axle can
be pressed into the tube. The cap is
then released, and if a click is heard
the wheel is correctly fitted. (A1)
· The rear wheels are removed by press-
ing in the central cap and removing the
axle from the tube. (A2)
English
11