Maintenance
Start maintenance (wiper blades check, capping unit cleaning, cleaning)
1
PRINTER READY
01: PAPER / 1626mm
2
MAINTENANCE
2START MAINTENANCE
3
>START MAINTENANCE
OK?
4
IP7-264 Cleaning swab (Thick)
* IP6-264 is also included in the IP6-271 daily
maintenance kit A.
5
1ST WIPING OPERATION
PLEASE WAIT
Carriage stops moving.
6
OPEN COVERS, CLEAN
CAPS AND CHECK WIPER
42
7
GOOD
The procedure
If you find that the wiper blades are damaged or
dirty, execute REPLACE WIPER BLADE to replace
the wiper blades after START MAINTENANCE has
finished.
8
IP6-272 Cap cleaning liquid A
* IP6-272 is also included in the IP6-271 daily
1:00
* To keep the cap cleaning liquid clean, do
* You can clean the entire capping unit with
BAD
Continue the procedure
is nished.
from step 2.
maintenance kit A.
not soak the cleaning swab (thick) in the cap
cleaning liquid bottle again after you have
cleaned the caps with it.
one cleaning swab (thick) soaked once in cap
cleaning liquid.