Care And Cleaning; Stainless Steel Or Aluminium Appliances; Removing The Shelf Supports - Zanussi ZOP38903 Manual De Instrucciones

Food
Apricots
Apple slices
Pears

Care and cleaning

WARNING!
Refer to Safety chapters.
Notes on cleaning
• Clean the front of the appliance with a soft
cloth with warm water and a cleaning agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the appliance interior after each use.
Fat accumulation or other food remains may
result in a fire. The risk is higher for the grill
pan.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all accessories after each use and let
them dry. Use a soft cloth with warm water
and a cleaning agent.
• If you have nonstick accessories, do not
clean them using aggressive agents, sharp-
edged objects or a dishwasher. It can cause
damage to the nonstick coating.

Stainless steel or aluminium appliances

Clean the oven door with a wet
sponge only. Dry it with a soft cloth.
Do not use steel wool, acids or
abrasive materials as they can
damage the oven surface. Clean the
oven control panel with the same
precautions.

Removing the shelf supports

To clean the oven, remove the shelf supports.
18
Temperature
(°C)
60 - 70 8 - 10
60 - 70 6 - 8
60 - 70 6 - 9
Time (h)
1 position
3
3
3
1
Pull the front of the
1
shelf support away
from the side wall.
Install the shelf supports in the opposite
sequence.
Pyrolysis
CAUTION!
Remove all accessories and
removable shelf supports.
Do not start the Pyrolysis if you did not fully
close the oven door.
WARNING!
The appliance becomes very hot.
There is a risk of burns.
CAUTION!
If there are other appliances installed
in the same cabinet, do not use
them at the same time as the
Pyrolysis function. It can cause
damage to the appliance.
Shelf position
2 positions
1 / 4
1 / 4
1 / 4
2
1
2
Pull the rear end of
2
the shelf support
away from the side
wall and remove it.
www.zanussi.com