56 Progress
Control panel overview
1
On / Off
1
First motor speed
2
Second motor speed
3
Third motor speed
4
Maximum motor speed
5
DAILY USE
Using the hood
Check the recommended speed according
to the table below.
It is recommended to leave the
hood operating for
approximately 15 minutes after
cooking.
The control Panel is a sensor
field. Touch the symbols to
activate the functions.
To operate the hood:
1. Turn on the appliance by pressing the
button.
The functions are ready to be activated.
2
3
4
While heating up food, cooking with covered pots.
While cooking with covered pots on multiple cooking zones or burn‐
ers, gentle frying.
While boiling, frying big quantities of food without a lid, cooking on
multiple cooking zones or burners.
While boiling, frying big quantities of food without a lid, big humidity.
The hood operates on maximum speed. After 6 minutes the appliance
returns to previous setting.
5
6
Filter reminder
6
Hob to Hood function
7
Lamp
8
2. To activate the function touch the
symbol.
To turn off the appliance press the
button again.
Hob to Hood function
It is an automatic function which connects
the hob with a hood. Both the hob and the
hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting
and temperature of the hottest cookware
on the hob. You can also operate the fan
using the hob manually. The function can
be activated from panel of the hob.
7
8