What to do if...
Problem
You cannot activate the ap‐
pliance.
You cannot activate the ap‐
pliance.
The lamp does not operate.
The appliance does not ab‐
sorb enough vapours.
The filter alarm indicator
is on.
The filter alarm indicator
flashes.
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol
the packaging in relevant containers to
recycle it. Help protect the environment
and human health by recycling waste of
electrical and electronic appliances. Do
Possible cause
The appliance is not con‐
nected to a power supply or
it is connected incorrectly.
The fuse is blown.
The lamp is defective.
The motor speed is not ade‐
quate to the appearing va‐
pours.
The filter alarm is on. The
grease filter must be
cleaned.
The filter alarm is on. The
charcoal filter must be re‐
placed or cleaned.
not dispose of appliances marked with the
. Put
symbol
Return the product to your local recycling
facility or contact your municipal office.
Remedy
Check if the appliance is
correctly connected to the
electrical supply.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
Replace the lamp. Refer to
the "Care and Cleaning"
chapter
Change the speed of the
motor.
Refer to the filter alarm in
care and cleaning chapter.
Refer to the filter alarm in
care and cleaning chapter.
with the household waste.
Progress 59