Appendix 1 - Results Displayed At The End Of Each Test - Megger BM25 Guia Del Usuario

APPENDIX 1
Results Displayed at end of each test
IR Test
Default test time 30 minutes.
Timer Digital Indicator
Test Duration
Test Duration
Test Duration
Test Duration
Note: A capacitance value reading is only available if the test has run for
more than one minute, and provided the reading was not over-range.
26
Voltage Indicator
Blank Final test voltage
R Final test voltage
I
Final test voltage
µF Final test voltage
PI Test
Default test time of 10 minutes. Terminating the test prematurely still
allows the test results to be calculated and displayed.
Timer Digital Indicator
T3
Test Duration Blank
PI (T1 to T2)
T2 time
T3 time PI (T2 to T3)
T1 time R at T1 time
R at T2 time
T2 time
T3 time R at T3 time
T3 time µF
Note: A capacitance value reading is only available if the test has run for
more than one minute, and provided the reading was not over-range.
Voltage Indicator Other
Final test voltage
Voltage at T2 time PI cursor
flashes
PI cursor
Voltage at T3 time
flashes
Voltage at T1 time
Voltage at T2 time
Voltage at T3 time
Voltage at T3 time