Press the SET / RESET button
maximum and minimum values, are being dis-
played to reset the values.
Press the SELECT button, to return to the
default display.
Displaying temperature trends
After successfully connecting with the outdoor
sensor, the weather station can display the tem-
perature trend (outdoor)
trend (indoor)
You may see the following displays:
= The temperature is rising.
= The temperature is constant.
= The temperature is falling.
Battery state display
The
3
weather station's LC display if the batteries in the
outdoor sensor or the weather station are weak.
Replacing the batteries
Open the battery compartment
Remove the exhausted batteries.
Insert two new 1.5 V
battery compartments.
Note: Make sure you fit the batteries the
right way round (polarity). This is shown in
the battery compartments (see Figs. C + E).
Close the battery compartments.
.
5
and
7
20
and the temperature
1
symbols appear in the
batteries (AA) into the
while the
or
.
24
30
GB/MT
91