Kärcher Tornado EB 30/1 Manual De Instrucciones página 6

Symbols on the machine
– Protect the charger against moisture;
store it dry. The appliance is suitable for
use only in rooms; do not expose the ap-
pliance to rain.
Start up
Description of the Appliance
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been da-
maged. If you detect any transport damages
please contact your dealer.
Note: Please refer to page 2 for figures of
the appliance and the operation.
1 Universal joint
2 ON/OFF foot switch
3 Rechargeable battery, detachable
4 Unlocking button, battery
5 Dirt container, detachable
6 Unlocking mechanism for dirt container
7 Casing
8 Brush roller, changeable
9 Unlocking button for brush roller
10 Telescopic strut, adjustable height
11 Turning handle for height adjustment
12 Handle
13 Charger with charging status display and
charging cable
Installing the telescopic handle and
the handle and adjusting the height
see Figure 2
The telescopic strut consists of 3 parts. Whi-
le assembling it, make sure that the parts
lock into each other.
Insert the handle on the longer strut with
turning handle.
Insert together the longer and shorter
struts; while assembling it, press the
locking button.
6
English
Insert the entire strut with the locking but-
ton into the joint on the appliance.
Loosen the handle and pull out the strut
to the desired working height; turn the
handle to the correct position and tighten
using the turning handle.
Charge the battery
see Figure 3
The battery is not charged at the time of de-
livery. Charge it before commissioning the
appliance and then as and when required.
Note
The battery can be charged only when it is
removed out of the appliance.
Connect battery with charger using the
charger cable.
Insert the charger delivered with the ap-
pliance into a proper socket.
The charger display glows red. The battery
is being charged.
Note
– The charging time for an empty battery is
approx. 12 hours.
– If the charging time is exceeded, the
charger shifts to retention charging. The
charger display continues to glow red.
Insert the battery
see Figure 4
Insert the battery into the intake and lock
it.
Operation
Starting the work
see Figure 5
Switch on the appliance; press the on/off
foot switch to do so.
Move the appliance forward and back-
ward to clean it.
Use the right side (battery side) to clean
the appliance close to the edges.