Spark Plug - Ryobi RBL30BPT Manual De Utilización

EN
FR DE ES IT PT
WARNING
Never run the blower without the spark arrestor
in place. Failure to do so could result in a fire that
could cause serious personal injury.
C L E A N I N G T H E E X H A U S T P O R T A N D
MUFLER
Depending on the type of fuel used, the type and amount
of oil used, and/or your operating conditions, the exhaust
port and muffler may become blocked with carbon
deposits. If you notice low power from the blower, have
a qualified service technician check the exhaust port
and muffler for carbon deposits. Removing the carbon
deposits should restore performance to the blower.
FUEL CAP
WARNING
A leaking fuel cap is a fire hazard and must be
replaced immediately. Failure to do so could result
in a fire that could cause serious personal injury.

SPARK PLUG

This engine uses a Champion RCJ-6Y and NGK spark
plug BPMR7A with 0.63 mm (0.025 in.) electrode gap.
Use an exact replacement and replace annually.
RBL30BPT V1.indd 16 RBL30BPT V1.indd 16
NL SV DA NO FI EL HU CS RU
English
STORAGE (1 MONTH OR LONGER)
■
■
■
16
RO PL SL HR TR
WARNING
Be careful not to cross-thread the spark plug.
Cross-threading will seriously damage the
product.
Drain all fuel from the tank into a container approved
for gasoline. Run engine until it stops.
Clean all foreign material from the blower. Store it in
a well-ventilated place that is inaccessible to children.
Keep away from corrosive agents such as garden
chemicals and de-icing salts.
Abide by all Federal and local regulations for the safe
storage and handling of petrol. Excess fuel should be
used up in other 2-stroke engine powered equipment.
ET LT LV SK BG
5/14/09 8:41:40 AM 5/14/09 8:41:40 AM