Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Menu 02 : Humidity SetPoint setting
Menu 02
Humidity
By pressing the
key, the display shows the
humidity of the first phase of the program in
Set 1:
Current:
progress :
keys, it will be possible to change the
set humidity value. To confirm the value and move
Menu 03 : Phases' time setting
Menu 03
Time
By pressing the
key, the display shows the
duration time of the first phase of the current
Time
1:
Current :
program :
keys, it will be possible to change the
set duration time of the 1st phase. To confirm the
value and move to the next step, press and hold
; the display shows the duration time of the
second
phase
of
the
Menu 04 : Setting of the interval for the activation of the extractor fan
Menu 04
Extractor
By pressing the
key, the display shows the
laps of time for the activation of the extractor fan
for the air exchange during the first phase of the
current
program
:
Using the
keys, it will be possible to
change the set laps of time for the activation. To
confirm the value and move to the next step,
press and hold
; the display shows the time
laps for the activation of the extractor fan for the
air exchange during the second phase of the
Interval.2:
Current
current program :
40%
40%
. Using the
24h
24h
. Using the
current
program
:
Interval.1:
2h
Current
:
2h
.
2h
:
2h
.
to the next step, press and hold
shows the humidity of the second phase of the
program in progress :
Proceed in the same way for the six available
phases. To return to the main menu press
Time
2:
24h
Current:
24h
way for the six available phases. To return to the
main menu press
It is possible to set the duration in hours up to 96
hours (h label), over this limit the setting is
displayed in days (d label) up to a maximum of
599 days.
By setting a phase to the maximum duration
(greater than 599 days), this phase has infinite
duration and is indicated with the label INF.
Time
2:
24h
Current:
24h
way for the six available phases. To return to the
main menu press
Setting the interval to zero will be inhibited the
activation / deactivation of the automatic extractor
fan, you can still activate it manually by pressing
the button
for 3 seconds.
The fan remains on until the next manual
deactivation.
By setting the interval to the maximum value
(indicated with the label ON) the fan starts at the
beginning of the corresponding phase and works
until its end.
The duration of the activation of the fans for the
air exchange is given by the parameter F13.
9
ENGLISH
; the display
Set 2:
50%
Current:
50%
.
. Proceed in the same
.
. Proceed in the same
.
.
GB
Publicidad
Capítulos
Tabla de contenido
