ENGLISH
Menu 05 : Setting of the pause cycles
For each of the six stages of the current program,
following parameters can be set: :
Type: activation type of the pause cycles
(automatic or manual by button)
Delay: activation delay of the pause from the
beginning of the current phase.
Duration: Duration of each pause.
Interval: the lapse of time between each
pause phase.
Days: Total number of days of the pause
GB
cycle.
Menu 05
Pause
By pressing the
setting mode for the pause cycles.
Using the
select one of the five parameters which define the
pause cycle :
Pause:
Type
type of activation of the pause cycle (automatic or
manual).
Pause:
Delay
delay of the activation of the pause cycle from the
beginning of the current program (from 0 to 240
Menu 07 : Defrosting
Menu 07
Defrost
By pressing the
you want to start a manual defrosting :
Start Defrost?
No
key, you will enter the
keys, it will be possible to
: it allows to change the
: it allows to change the
key the display will ask you if
Ok
.
days). By setting the activation delay of the first
phase pause cycle to zero and starting the
program from the first phase (for example by
pressing the button
program restarts without the pause cycle at the
beginning.
Successive
performed regularly, at the interval chosen.
Pause:
Time
duration of the pause cycle (from 1 minute to 240
minutes).
Pause:
Interval.
interval btween two pause cycles (from 1 hour to
24 hours)
Pause:
Days
total number of days of the pause cycle (from 0 to
240 days). By setting the total number of days at
more than 240 days (displayed with the label INF)
the pause cycle continues for all the duration of
the current program.
To return to the main menu press
By pressing the
the defrosting will not start.
By pressing the
will be started. During the defrosting the display
shows the temperature detected by the room
Defrost
Room
probe :
10
for 3 seconds) the
pause
cycles
are
: it allows to change the
; it allows to change the
: it allows to change the
.
key you exit the menu and
key, a manual defrosting
-12°C