Secury 2178 - G-U SECURY 21 S Serie Instrucciones De Montaje

Check through pressing on the latchbolts (max. 20 N) whether they are
secured against being forced back.
„ „
In the decoupled status (operating voltage off), couple in the inside and
outside lever handle using the locking cylinder / cylinder cam.
Check whether all latchbolts are pulled back when the outside lever
handle is actuated.
Check whether the inside and outside lever handles can be pressed
down easily.
Now decouple the outside lever handle again using the locking cylinder
/ cylinder cam. The outside lever handle must have no function now
(idle).
„ „ Couple the outside lever handle in electrically.
Check whether all latchbolts are pulled back when the outside lever
handle is actuated.
Now decouple electrically the outside lever handle again. The outside
lever handle must have no function now (idle).
„ „ Separate the multi-point lock from the power circuit.
Operating current (fail-secure) version:
Check whether the outside lever handle is decoupled (idle).
Quiescent current (fail-safe) version:
Check whether the outside lever handle is coupled in.
„ „ Make sure that, after the test, all latchbolts are pulled back, i.e. all latch-
bolts are in the initial position.

4.1.2 SECURY 2178

„ „ Make sure that the power supply to the multi-point lock exists.
„ „ Make sure that the multi-point lock is electrically decoupled (no control
signal).
Check through actuation of the inside and outside lever handle whether
the handles have function (idle).
53