Stiga BC 900 D Li 48 Manual De Instrucciones página 22

d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the machine. Power tools are dangerous
in the hands of untrained users.
e) Maintain power tools and accessories.
Check for misalignment or binding
of moving parts, breakage of
parts and any other condition that
may affect power tool operation.
In case of damage, the power
tool must be repaired before it
can be used. Many accidents are
caused by poor maintenance.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely
to bind and are easier to control.
g) Use the power tool and its accessories
in accordance with these instructions,
taking into account the working
conditions and the task to be
performed. Using the power tool for
operations other than those intended
could result in a hazardous situation.
h) Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles
and grasping surfaces do not allow
for safe handling and control of the
tool in unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire,
electric shock, overheating or corrosive
liquid to leak from the battery. when
used with another battery pack.
b) Use power tools exclusively with
specifically designated battery
packs. Use of any other battery packs
may create a risk of injury and fire.
c) When the battery pack is not in
use, keep it away from other metal
objects such as paper clips, coins,
keys, nails, screws or other small
metal objects that may create a
connection from one terminal to
another. Shorting the battery terminals
together can cause burns or a fire.
d) Under abusive conditions, liquid
may be ejected from the battery:
avoid contact. If contact accidentally
occurs, flush with water. If the liquid
contacts eyes, seek medical help
immediately. Fluid ejected from the
battery may cause irritation and burns.
e) Do not use a battery pack or tool that
is damaged or modified. Damaged
or modified batteries may exhibit
unpredictable behaviour resulting
in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool
to fire or excessive temperature.
Exposure to fire or temperature above
130 °C may cause explosion.
g) Charge only at room temperature,
between 0° + 45°C. Do not charge
the battery pack or tool outside the
specified temperature range. Charging
improperly or at temperatures outside
the specified range may damage the
battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
b) Never service damaged battery
packs. Service of battery packs should
only be performed by the manufacturer
or authorized service providers.
2.2 TRAINING
DANGER
Become acquainted with the
controls and the proper use
of the machine. Learn how
to stop the machine quickly.
Failure to follow the warnings
and instructions may result
in fire and/or serious injury.
• Never allow the machine
to be used by children or
individuals who are not
familiar with the instructions.
Local laws may establish a
minimum age for users.
• Never use the machine if
the user is tired or unwell,
or has taken medication,
drugs, alcohol or substances
that impair reflexes
and concentration.
EN - 3