Tabla de contenido
Publicidad
• Always work across the face
of the slope and never up and
down it, being very careful
when changing direction,
making sure the cutting means
is always downstream.
• Look out for traffic when using
the machine near the road.
Conduct
• When working, the machine
must always be firmly held
in both hands, keeping the
power unit on the right of the
body and the cutting group
below the line of the belt. Do
not excessively extend arms.
• Avoid body contact with
earthed or grounded surfaces,
such as pipes, radiators,
cookers and refrigerators.
There is an increased risk of
electric shock if your body
is earthed or grounded.
• Always use caution and
take on a firm and well-
balanced position.
• Never run, always walk.
• During operation, always
keep the machine connected
to the battery backpack.
• Always keep hands and
feet away from the cutting
means, when starting and
when using the machine.
• Attention: the cutting
means will continue to rotate
for a few seconds after
disengagement or after you
have switched off the motor.
• Be careful of flying debris
coming from the cutting means.
• Be careful of avoiding violent
collisions between the cutting
means and foreign objects/
obstacles. Kickback may occur
if the cutting means comes
into contact with an obstacle/
object. This contact can cause
a rapid jerk in the opposite
direction, pushing the cutting
means up and towards the
operator. Kickback can cause
the operator to lose control
of the machine, leading to
serious consequences. To
avoid kickbacks, take all
the appropriate precautions
indicated below:
• Firmly hold the machine,
with two hands, and place
your body and arms in
a position that allows
you to resist kickback.
• Do not extend the arms
too high and do not cut
above waist height.
• Only use the cutting
means specified by
the manufacturer.
• Follow the manufacturer's
instructions concerning
cutting means maintenance.
• Beware of injuries
caused by devices used
to cut the line
DANGER
If something breaks or an
accident occurs during work,
turn off the motor immediately
and move the machine away to
prevent further damage; if an
accident occurs with injuries
or third parties are injured,
carry out the first aid measures
most suitable for the situation
immediately and contact the
medical authorities for any
necessary health care. Carefully
remove any debris which could
cause damage or injury to
persons or animals if ignored.
EN - 5
length.
Publicidad
Tabla de contenido
