Installing The Ferrite Core; Connections On The Back; Power Supply - JVC TK-C1480B Manual De Instrucciones

CONNECTION/INSTALLATION

Installing the ferrite core

To retain electromagnetic compatibility, use the ferrite cores provided when connecting to the
lens.
Notes:
Install the ferrite cores within 50 mm of the camera-side connectors. (Fasten the ferrite
core with the wire clamp provided.)

Connections on the back

Power supply

TK-C1480BE (DC 12 V or AC 24 V)
+ -
1 2
SYNC IN VIDEO OUT
POWER
E-16
IRIS
VIDEO
DC
Ferrite core
+ -
+ -
GND
TX TX RX RX AUX
A B C D
Y/C OUT
SEE INST-
RUCTION
MANUAL
Video-iris lens
(or galvanometnc-iris lens)
Wire clamp
Connect the DC 12 V or the AC 24 V power
supply to the DC 12V/AC 24V terminals. To
prevent connection errors or a cable
disconnection, we recommend the use of lug
plates for the connections.
The following table shows the connection
distances and connection cables provided
that 2-conductor VVF cables (vinyl-insulated
vinyl sheath cables) are used.
Maximum extension
100 m 260 m 410 m 500 m
(reference)
Conductor 1.0∅mm 1.6∅mm 2.0∅mm 2.6∅mm
diameter and more and more and more and more