Video Adjust Screen - JVC TK-C1480B Manual De Instrucciones

MENU SETTING

VIDEO ADJUST Screen

Adjustments are made on video signals.
Item
WHITE
BALANCE
COLOUR
LEVEL
ENHANCE
LEVEL
PEDESTAL
LEVEL
AUTO
BLACK
CTL
E-30
Functions and set values
Selects the white balance adjustment function. The white
balance can be adjusted manually or automatically for
light within the colour temperature range of 2500K to
8000K.
• ATW: Auto-Tracking White Balance mode.
This automatically adjusts the white balance.
• AWC: Auto White Balance Controll mode. When the
SET button is pressed, the adjustment
screen appears.
( Page 35)
To adjust the colour level of the video signal.
• To make colours lighter ... Decrease the value
• To make colours darker ... Increase the value
[Set values: –5 to NORMAL to 5]
To adjust the contour enhancing level of the video signal.
• To make the picture quality harder ... Increase the value
• To make the picture quality softer ... Decrease the value
[Set values: –5 to NORMAL to 5]
To adjust the pedestal level of the video signal.
• To brighten picture ... Increase the value
• To darken picture ... Decrease the value
[Set values: –5 to NORMAL to 5]
This is set when it is difficult to view a dark part of the
image even if gain is boosted by the AGC (automatic gain
control).
ON: When a black level of the image signal is low, a
pedestal level that becomes the standard of black
is automatically elevated, making it easier to view a
dark part.
OFF: AUTO BLACK does not function.
MEMO
• When PEDESTAL LEVEL is set to 5, no function can
take place even if AUTO BLACK CTL is ON.
• When AGC MODE is set to OFF, no function can take
place even if AUTO BLACK CTL is ON.
Initial value
ATW
NORMAL
NORMAL
NORMAL
OFF