GYS GYSPACK AIR Manual De Instrucciones página 13

Translation of the original instructions
• After the charging process, disconnect the bat-
Acid projection hazard!
• Wear safety goggles and protective gloves
• If your eyes or skin come into contact with bat-
Connection:
• Class II device (charger booster)
• Class III device (booster)
• Connection to the mains must be made accor-
Maintenance:
• If the charging / power supply cable is da-
• Service should be performed by a qualified
• Warning! Always disconnect from the mains
• If the internal fuse is blown, it must be replaced
• Under no circumstances should solvents or other
12
tery charger from the power supply network
and remove the connector from the car frame
and then the connector from the battery, in this
order.
tery acid, rinse the affected part of the body
with plenty of water and seek immediate medi-
cal assistance.
ding to the national installation regulations.
maged, the product must be disposed.
person
before performing maintenance on the device
(charger & booster).
by the manufacturer, its after-sales service or an
equally qualified person.
aggressive cleaning agents be used.
GYSPACK AIR
Autogoods "130"
EN