Air Compressor - GYS GYSPACK AIR Manual De Instrucciones

Translation of the original instructions
USING THE GYSPACK AIR AS 12V DC POWER SUPPLY
The cigarette lighter plug is protected by an integrated 20 A circuit breaker. In the event of an
overheating due to an overcharge, the circuit breaker will stop the power supply.
Position the switch «OFF».
Open the lead of the cigarette lighter plug Remove cigarette lighter and plug lead into the hole (n°1 fig p. 65).
Plug your electrical device into the plug of GYSPACK AIR, using the proper cable (not included).
Estimated autonomy of GYSPACK AIR as a 12 V DC power supply
Device
Fluorescent cellular light
Radio, Fan, Echoprobe
Videocamera, light spot
Power tool, drying pump
Air Compressor, Car vaccum cleaner
SPOT-LIGHT
The GYSPACK AIR has an in-built spotlight comprised of 7 high intensity LEDs controlled by the «light» button (n°11
fig p. 65).
Repair should always be carried out by qualified personnel.

AIR COMPRESSOR

GYSPACK AIR integrates an 4 bars compressor, allowing to inflate :
• Tyres with their original valve. (press the lever to lock the hose on the valve).
• Balloons with thin end (included).
• Any other plastic objects (beach balloons, toys, air beds, etc.) with 2 special ends "connectors"
Usage
• Turn the GYSPACK AIR main switch to « off »
• Press the "ON" button to start compressor.
Nb : the compressor can work for 10mn maximum. Please wait 10mn between the next use.
• Flowmeter indicates the current air pressure
• Stop the compressor when the required pressure is reached
USE OF CIGARETTE LIGHTER PLUGS
GYSPACK AIR
Estimated consumption (in watts)
4
9
15
24
80
This type of cigarette lighter connection lead is limited to 10A. Supplied with some
of our GYSPACK, they are SOLELY designed for memory backup. Any other use
can be dangerous.
Risk of fire! We strongly advise against using the cigarette
lighter lead to jump start or power a 12V appliance for instance.
Autogoods "130"
Estimated automomy (in hours)
50
22
13
8
2
EN
15