Using The Pc; Software Installation - Televes CDC Manual De Instrucciones

User Manual
5.2.- Using a PC
Using the "Headend Management" software
and the special cables supplied with the
module, it is possible to carry out a remote
or local connection.
From the program the user can configure
and read all the operational parameters,
monitor the devices connected to the CDC
to check that they are all functioning
correctly and program the OSD.

5.2.1.- Software installation

The Headend Management program comes
on a CD-ROM for Windows. To install the
program, insert the CD-ROM into the reader
and follow the instructions that appear
onscreen. If the start-up program doesn´t
begin, because that option is disabled, the
user should do the followoing:
· Double click on the "My PC" icon on the
Windows desktop
· In the "My PC" window, double click on
the CD-ROM reader icon (normally d:\)
· In the CD-ROM unit window, double click
on the "setup.exe" icon.
· Follow the instructions
onscreen.
50
Headend Control - CDC
that appear Once the installation is complete, the
Headend Control program starts after the
user double clicks on the corresponding
icon .
Figure 7
setup.exe