Televes CDC Manual De Instrucciones página 55

User Manual
OPTION 2:
The second option when creating a new
headend consists of reading the configu-
ration of the physical headend. To do so,
the headend is scanned.
EDIT HEADEND DATES
START SESSION
MANUAL SCAN
LOAD HEADEND
SEND CONFIGURATION
MONITORISATION (OPTIONAL)
STORE
END SESSION
Figure 13
First the user must start the session.
The user must carry out a headend scan
using the "Report of the modules connected
to the CDC" option in "Management" (figure
14), indicating the addresses that need to be
scanned.
55
Headend Control - CDC
In the example in figure 14, the headend
controller searches for the addresses indica-
ted, beginning with 1 and ending with 27.
It's important to locate the headend devices
with consecutive addresses in order to faci-
litate the address search.
Directions to be scanned
Figure 14