Software Headend Control - Televes CDC Manual De Instrucciones

User Manual
6.- HEADEND CONTROL SOFTWARE
After powering the headend, the user must
connect the PC to the headend controller
module directly (local connection) or via a
modem (remote connection). It is important
to note that two different connectors on the
controller module are used in these cases
(see figure 4).
The Headend Control program starts after
you double-click on the corresponding icon
.
Here you can see the program's main win-
dow (figure 8)
Save
headend
Order racks
Create new
headend
Open headend
Remote
connection
Start
session
51
Headend Control - CDC
Identify
device
Main menu
EDITING COMMANDS:
- Selection
- Zoom
- Move
DEVICE SELECTION:
- CDC
- QPSK-PAL
- COFDM-PAL
- TDT
- Analogue processor
- etc...
HEADEND FUNCTIONS:
- Activate/stop scans
- Send configuration
- Read configuration
Figure 8