Televes CDC Manual De Instrucciones página 63

User Manual Headend Control - CDC
The design generated on the OSD screen will appear in
the RF channel generated by the CDC at the actual ins-
tallation.
To develope the screen, it is possible to write a text by
simply placing the cursor where you want to write, or by
composing the image as if it were a mosaic by clickiing
on a character or symbol to select it and then clicking on
the area where you want to place it.
To select the text or symbol colour, click on one of the
colours on the colour palette. If you want to change the
text or symbol background colour, right click on one of
the colours on the colour palette. The colours you have
selected will appear under the names "Line colour" and
"Background colour".
Once you have finished designing the screen, select
"Exit" to save the data and return to the window of the
headend controlling device.
It is necessary to take into account that the page will not
be loaded onto the actual device until the button "Send
all screens" has beenn pressed or until the page which
has been edited is programmed by selecting the edited
page and by pressing the "Send screen" button".
The edited page is not saved on a disk until the "Save
Screens" button has been pressed.
The pages that have been programmed in the CDC
Figure 24
CANNOT be read from the program. They can only be
erased and/or reprogrammed with different ones that are
loaded on the PC.
OSD editing screen
63