Thermador MASTERPIECE Serie Manual De Instrucciones página 15

Setting the temperature range
There are five temperature ranges for CookSmart™:
Setting Temperature
range
1 140-160° F
(60-70 °C)
3 175-195° F
(80-90 °C)
5 195-215° F
(90-100 °C)
7 230-250° F
(110-120 °C)
9 335-350° F
(170-180 °C)
Setting CookSmart™
CAUTION
9
Even though the SensorDome™ is retracted, its
cover will get hot when the adjacent heating
element is on.
The cooktop must be turned on.
Place food in the pot and add liquid.
1.
Note: Fill at least to 1 ¼" (3 cm) deep. Fill specialized
pots at least to the reference mark.
Place the pot in the center of the heating element and
2.
cover with the lid.
Press the SensorDome™ for the desired heating
3.
element to cause the sensor to extend out.
The heating element is selected.
display.
Suitable for
Thawing, heating, keeping
warm
Below-boiling cooking, soak-
ing and steaming
Cooking, boiling, braising
Cooking in a pressure
cooker
Deep frying
'‹ will appear in the
Touch the desired temperature range in the setting
4.
area. CookSmart™ is activated.
&22.,1* )$67
352*5$06 35(+($7
   
ƒ  ƒ
The temperature range that you selected will appear in
the display along with a dot, which will continue to be lit
until the proper temperature has been reached. An
audible signal will be issued, and the dot will disappear.
CookSmart™ keeps the temperature of the pot within the
temperature range that you set.
Changing the temperature range
Set the desired temperature range in the setting area or
using and .
@ A
Turning off CookSmart™
Retract the SensorDome™ for the heating element, or set
to 0 with the number keys. The heating element will turn
off after about 10 seconds. The residual heat indicator
will appear.
Note: You can also put food in hot liquids. Fill the pot
with liquid only. Adjust settings as described in 3 and 4
above. When the desired temperature is reached and an
audible signal sounds, place the food in the liquid.
7,0(5
PLQ
    
 ƒ ƒ ƒ
15