Using Your Stroller With The Recommended Infant Car Seats In Your Toddler Seat - Evenflo Pivot Manual Del Usuario

USING YOUR STROLLER WITH THE RECOMMENDED INFANT CAR SEATS IN YOUR TODDLER SEAT

• Only use the Evenflo SafeMax™ infant car seat with this stroller. Other infant car seats or carriers are not
designed to fit the stroller frame and if used with this stroller may result in serious injury to your child.
• Before using the infant car seat with this stroller, read all the instructions provided with it and keep the instructions
stored properly for future use.
• DO NOT lift stroller by using the infant car seat handle when installed on stroller.
• If unable to securely attach infant car seat to this stroller, remove the car seat and contact Evenflo ParentLink at
1-800-233-5921 (USA), 1-937-773-3971 (Canada), or 01-800-706-12-00 (Mexico).
• To avoid serious injury, make sure the infant car seat is securely snapped onto the car seat mounts.
• Some infant car seats have a blanket/boot option that must be removed for proper attachment to this stroller.
• To avoid injury, never use the infant carseat inside the toddler seat in the forward facing position.
• NEVER attach carseat to the toddler seat when the toddler seat is in the reclined position.
• NEVER use infant car seat or toddler seat in any other position other than what is recommended in these
manufacturer's instructions.
1. Fully recline the seat back with the recline strap (pg. 12 - Step 4). NEVER use the recline handle (pg. 12 - Step 5)
to recline the seat when installing the infant car seat into the toddler seat.
2. Make sure the bumper bar is securely latched (page 8).
3. The infant car seat MUST be facing the parent when installed. Position infant car seat over the stroller. Touch rear vertical
surface of infant car seat against rear vertical surface
A
push down on handle until it clicks into the car seat mounts
4. Pull up on the front and back of the infant car seat to test that it is properly locked into place.
1
CLICK!
CHECKLIST FOR PROPER INSTALLATION
• Make sure the infant car seat is in the rear-facing position (facing the parent).
• Make sure the infant car seat is securely locked into the car seat mounts
resting on the bumper bar
• Pull up on the front and back of the infant car seat to test that it is properly
locked into place.
21
CLICK!
.
B
WARNING
of bumper bar. Lower the infant car seat into the stroller and
B
.
C
and
C