Monogram ZISB36 Manual De Instrucciones página 13

Design Guide - Standard Installation
Top View
90° DOOR SWING
Scale 1:1
IMPORTANT NOTE –
FOR DISPENSER MODELS:
Dispenser models are supplied
with two dispenser trims, one
to fit framed panels and one for
overlay panels. Dispenser trim
fit to the custom panel depends
on correct panel thickness.
Framed panels must be 1/4"
(0.63 cm) nominal. Overlay
panels should be constructed
as shown to accomplish a total
1.100" (2.79 cm) thickness. See
page 13 for details.
31-1000450 Rev. 1
Refrigerator
Door
13
Frameless Cabinets:
The case trim overlaps
cabinets at the top
and sides. Therefore,
frameless cabinets may
Case Trim
require filler strips to
prevent interference with
cabinet door swing. The
opening must allow for
filler strips.
23-7/8"
From Rear of
Refrigerator
1/4"
1/2"
3/4" Overlay
1/4"
(Nominal Size)
1/2"
3/4"
1"
1-1/4"
3/4"
1"
1-1/4"
1-1/2"
Panel