Quickstart Instructions - Shure PSM 1000 Guia Del Usuario

Del sistema de monitoreo personal
Ocultar thumbs Ver también para PSM 1000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45

Quickstart Instructions

Rack Mount Transmitter
1. Connect to a power outlet using the supplied power cable.
2. Attach the supplied antennas to the antenna out BNC connectors.
3. Connect the audio source, such as the output of a mixer, to the au-
dio inputs. You can use both input jacks or choose either one for a
mono source.
4. Switch RF off and power on.
5. For mono (one input), access the Audio menu and select Mono.
Set the input sensitivity to match the source using the Util > Audio
> INPUT setting.
6. Adjust the audio source level so that, for the average input signal
level, the top two yellow LEDs flicker and the lower LEDs are solid.
If the red clip LED illuminates and a warning appears on the LCD,
the inputs are overdriven. Decrease the audio input level to +4 dBu
from the Audio menu. If the signal level is too low, change the input
sensitivity to –10 dBV
Bodypack
Open by pressing the latches on both sides and pulling. Insert the bat-
teries or battery pack and attach antennas. Turn on using the volume
knob. The battery light illuminates.
Scan and Sync
1. On the bodypack, press the scan button. The display flashes
SYNC NOW....
2. Align the IR windows on the bodypack and rack unit, the IR win-
dow on the transmitter illuminates. Press the sync button on the
transmitter. The rack unit Level LEDs flash, and the screen dis-
plays SYNC SUCCESS.
3. Turn the RF switch on. The blue RF LED illuminates on the
bodypack to indicate that it is detecting the transmitter. The
bodypack also displays the RF signal strength (RF).
4. Important: Turn bodypack volume down before plugging in
earphones.
5. Insert the earphones and slowly turn up the volume.
Important: Remove the protective film from the face of the transmit-
ter or the IR sync may not work.
PSM1000
P10T
Dual Wireless Transmitter
with Audio Reference
Companding
PSM1000
P10T
Dual Wireless Transmitter
with Audio Reference
Companding
PSM1000
P10T
CLIP
Dual Wireless Transmitter
with Audio Reference
Companding
CLIP
CLIP
CLIP
3

Publicidad

Tabla de contenido
loading

Tabla de contenido