Siemens SITRANS F FCT030 Manual Del Usuario página 3

Pipe mounting
1. Mount mounting bracket with cushion pad on pipe using fastening brackets/U-bolts and supplied pipe adaptor. Note: U-
bolts and other miscellaneous hardware are not supplied with the flowmeter.
2. Tighten nuts (torque 10 Nm).
Note
Hygienic applications
If the device is wall or pipe-mounted in a hygienic application, always use domed nuts.
Mounting the transmitter
1. Remove screw from mounting bracket.
2. Mount transmitter on mounting bracket taking care that the flutes on the mating faces are correctly engaged.
3. Firmly tighten screw on mounting bracket (torque: 25 Nm).
FCT030 transmitter
3
A5E03650800-AH, 05/2015