Tool And Fastener Specifications - Paslode T200-F18P Manual De Instrucciones

TOOL AND FASTENER SPECIFICATIONS

MODEL NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
NAIL LENGTH
SHANK DIAMETER
OPERATING PRESSURE
TOOL AIR FITTINGS
This tool uses a 1/4" N.P.T. male plug. The inside diameter should be .28" (7mm)
or larger. The fitting must be capable of discharging tool air pressure when
disconnected from the air supply.
OPERATING AIR PRESSURE:
80 to120 psi. Select the operating air pressure within this range for best tool
performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
T200-F18P (Part # 515600)
10.63"
2.56"
10.04"
2.9lbs.
5 8 / - "
18 gauge
80 to 120 psi
:
3
" 2