Notes To The User; Symbols And Conventions; Scope Of Delivery; Approvals And Markings - Balluff BTL5-A/C/E1-M-SF-F Serie Manual De Instrucciones

BTL5-A/C/E1_ -M _ _ _ _ -SF-F _ _
Micropulse Transducer - Rod Style
1

Notes to the user

1.1 Validity
This guide describes the construction, function and setup
options for the BTL5 Micropulse Transducer with analog
interface. It applies to types
BTL5-A/C/E1_-M_ _ _ _-SF-F_ _ (see Type code
breakdown on page 14).
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the
transducer.
1.2

Symbols and conventions

Individual instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
1.3

Scope of delivery

– BTL5 transducer
– Condensed guide
Floats must be ordered separately (see
Accessories on page 12).
1.4

Approvals and markings

3-A sanitary standard no. 74-06: This
product has authorization number 1486
and only corresponds to the specifications
from 3-A SSI Inc. if used in conjunction
74-06
with a BTL-S-3112-4Z or
BTL-S-3112-4Z-SA10 float and the cotter
pin included in the scope of delivery for the
float.
US patent 5 923 164
The US patent was awarded in connection with this
product.
4 english
The CE Mark verifies that our products
meet the requirements of EU Directive
2004/108/EC (EMC Directive).
The transducer meets the requirements of the following
generic standards:
– EN 61000-6-1 (noise immunity)
– EN 61000-6-2 (noise immunity)
– EN 61000-6-3 (emission)
– EN 61000-6-4 (emission)
and the following product standard:
– EN 61326-2-3
Emission tests:
– RF emission
EN 55016-2-3 (industrial and residential areas)
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Surge
EN 61000-4-5
– Conducted interference induced
by high-frequency fields
EN 61000-4-6
– Magnetic fields
EN 61000-4-8
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
1.5

Abbreviations

3-A SSI 3-A Sanitary Standards, Incorporated
EHEDG European Hygienic Engineering & Design Group
FDA U.S. Food and Drug Administration
Severity level 3
Severity level 3
Severity level 3
Severity level 2
Severity level 3
Severity level 4