Notes To The User; Symbols And Conventions; Scope Of Delivery; Approvals And Markings - Balluff BML SF2-I2-GZZZ - ZZZ5-KA Serie Manual De Instrucciones

BML SF2-I2 _ _ -GZZZ - ZZZ5-...
Incremental Magnetic Encoder System
1

Notes to the user

1.1 Validity
This guide describes the construction, function and
installation options for the BML incremental magnetically
coded position measuring system. It applies to the
BML SF2-I2 _ _ -GZZZ - ZZZ5-KA/KD/KF _ _ and
BML SF2-I2 _ _ -GZZZ - ZZZ5-KA_ _-S284 sensor head
series (see Type code on page 27).
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the position
measuring system.
Additional documents can be obtained online
at www.balluff.com or by e-mailing
service@balluff.de.
1.2

Symbols and conventions

Individual actions are indicated by a preceding triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
1.3

Scope of delivery

– Sensor head
– Condensed guide (incl. declaration of conformity)
Different variants of the magnetic tapes are
available and must be ordered separately.
1.4

Approvals and markings

UL approval
File no.
E227256
www.balluff.com
The CE Mark verifies that our products
meet the requirements of the current
EMC Directive.
The transducer meets the requirements of the following
product standard:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Surge
EN 61000-4-5
– Conducted interference induced by
high-frequency fields
EN 61000-4-6
– Magnetic fields
EN 61000-4-8
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
1.5

Abbreviations

1Vpp Analog interface Sin/Cos (1Vpp)
FMEA Failure Mode and Effects Analysis
PL Performance Level
SIL Safety Integrity Level
1.6

Terms used

Rough location Quadrant of the analog interface Sin/Cos
(1 Vpp)
Severity level 4
Severity level 3
Severity level 4
Severity level 2
Severity level 3
Severity level 4
english 5