Installation, Assembly; Transport, Storage - Siemens 1FK6 03 Manual De Instrucciones

Fitted/mounted elements
Encoder system
Shaft end
(DIN 748-3; IEC 60072-1)
You will find more technical details, e.g. motor dimensions, in the catalogs NC 60 and
DA 65.3.
4

Installation, Assembly

4.1

Transport, Storage

Use suitable load suspension devices for transport and assembly.
Use lifting eyes for transporting the motors where these are provided by the manufacturer.
Lifting tackle as per 98/37/EU Directive for Machines, Appendix I.
The motors weigh up to 50 kg. For exact details, please refer to the catalog or dimensional
sheet.
Fig. 2 Lift and transport with suspension bands
Observe the transport regulations applying in the country/countries concerned.
Store in a dry, low-dust and low-vibration place (v
Siemens AG
Danger during lifting and transporting procedures!
Improper handling, unsuitable or defective devices, tools etc. can
cause injuries and/or property damage.
Lifting devices, ground conveyors and lifting tackle must correspond
to the valid regulations.
ENGLISH
- closed current holding brake
(DIN VDE 0580)
Supply voltage 24 V DC ±10%
- planetary gearing
- incremental encoder sin/cos 1 V
- absolute value encoder EnDat
- simple, absolute value encoder
- resolver
cylindrical with keyway and
feather key; Tolerance range k6
(balancing with half feather key)
WARNING
< 0,2 mms
eff
610.43 430.21
PP
-1
)
13