Display Symbols - HoMedics BPA-201 Manual De Instrucciones

Ocultar thumbs Ver también para BPA-201:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Display Symbols:

User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the heart rate per minute.
Irregular Heartbeat Detector: Refer to page 22 for
more information.
Memory Average: Displays average of last 3 readings
Risk Category Index: See page 21 for more information.
If
and any of the following letters and numbers appear in the area
that systolic pressure should be displayed, an error has occurred with your
reading. See Troubleshooting section of this manual for more information.
Measurement Error: Wrap the cuff correctly and keep arm steady during
measurement. Measure again.
Air Circuit Abnormality: Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear, then measure
again.
Error Determining Measurement Data: Measure again.
System Error: Measure again.
10

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido