Display Explanations; Display Symbols - HoMedics BPA-050 Manual De Instrucciones

DISPLAY EXPLANATIONS

Date/Time
Indicator
Systolic
Pressure
Diastolic
Pressure
Pulse Rate
9

Display Symbols:

User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the pulse rate per minute.
Memory Symbol: Shows the memory reading number.
Memory Average: Displays average of last 3 readings.
Risk Category Indicator: Compares readings against blood
pressure guidelines. See page 21 for more information.
(No Symbol)
If any of the following letters and numbers appear in the area that diastolic
MEM
START
pressure should be displayed, an error has occurred with your reading.
STOP
MEM
See Troubleshooting section of this manual for more information.
START
STOP
Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Measurement Error: Measurement result exceeds
measurement range. Measure again.
Air Circuit Abnormality: Check cuff connection.
Measure again.
Pressure Exceeding 300 mmHg: Switch the unit off to
clear, then measure again.
Data Error: Remove and reload the batteries.
--
Recalibration Alert: Recalibration recommended.
See page 25 for more information.
10