Display Symbols - HoMedics LEADER LDRBPA-060 Manual Del Usuario

Display Symbols:
lic
ure
If
area that systolic pressure should be displayed, an error has occurred
with your reading. See Troubleshooting section of this manual for
more information.
IB-LDRBPA060A.indd 10
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the heart rate per minute.
Memory Average: Displays average of last 3 readings
Risk Category Index: See page 20 for more information.
START
START
START
STOP
STOP
STOP
and any of the following letters and numbers appear in the
START
STOP
Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Air Circuit Abnormality: Check cuff connection. Measure
again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear,
then measure again.
Error Determining Measurement Data: Measure again.
10
2010/3/19 下午 4:10