Display Explanations; Display Symbols - HoMedics THERA-P BPW-200 Manual Del Usuario

DISPLAY EXPLANATIONS

Date/Time Indicator
Pulse Rate
Systolic
Pressure
Diastolic
Pressure
11

Display Symbols:

User 1: Appears when the monitor is operated
by User 1.
User 2: Appears when the monitor is
operated by User 2.
Weak Battery Symbol: Appears when batteries
should be replaced.
Pulse Symbol: Shows the pulse rate per minute.
Important Health Bulletin: See page 25
for more information.
Memory Average: Displays average of last
3 readings
Risk Category Indicator: Compares readings
against blood pressure guidelines. See page 24 for
more information.
If any of the following letters and numbers appear in the
(No Symbol)
START
area that diastolic pressure should be displayed, an error
STOP
has occurred with your reading. See Troubleshooting
section of this manual for more information.
Measurement Error: Measure again. Wrap
the cuff correctly and keep wrist steady
during measurement.
Air Circuit Abnormality: Measure again.
Pressure Exceeding 300 mmHg: Switch the unit
off to clear, then measure again.
Data Error: Remove and reload the batteries.
12