MV Agusta RIVALE 800CC Manual De Instrucciones página 154

Setting of "Custom" mapping
Press the start button when the engine is switched
on until selecting the "Custom" mapping of the control
unit.
WARNING
The "Custom" mapping setting operations must
be performed when the gear is in neutral and the
motorbike stationary with your feet on the
ground. Do not change the display while driving.
Press "SET" until "SETTING C MAP" appears.
In order to adjust the "Custom" mapping parameters to
your driving requirements, perform the following opera-
tions.
Throttle control sensitivity: Press "OK" for less than
three seconds until "GAS SENSITIVITY" appears.
OPERATION
- 61 -
4
4