How To Select The Mapping Of The Control Unit - MV Agusta RIVALE 800CC Manual De Instrucciones

4.4.9. How to select the mapping of the control unit

On the Rivale model is it possible to select different con-
trol unit mappings which allow to obtain variable power
and performance characteristics based on the type of
vehicle use.
NOTE
The mapping selection may be performed
even during the use of the vehicle.
4
The mapping of the control unit can be selected by
pressing the start button when the engine is switched
on; this way the mapping switches to the following setting
value. The corresponding mapping characteristics are
listed in the following table.
Mapping
Normal
Mode
Normal
OPERATION
Rain Sport Custom
Rain Sport
Customised
- 60 -
4