Default Values - ABB EIB DELTA Meter plus Instrucción De Instalación

Default Values

The table below lists the default values, check if any of them needs to be
changed. If so, see section Settings.
Parameter
VT ratio (Ut)
Transformer-rated only
CT ratio (Ct)
Transformer-rated only
Pulse frequency (P)
[imp/kWh]
Address (Adr)*
Baud rate (Bd)*
M-Bus only
* not used for EIB / KNX Delta Meters
Direct connected
meters
-
-
100
0
2400
45
Value
Transformer-rated
meters
1
1
10