Product Presentation; Verification Before Installation; Rear Bracket - Look 875 MADISON RS Manual De Montaje

PRODUCT PRESENTATION

Your Look 875 set has been developed and de-
signed according to the specifications of the LOOK
design office to offer the best transmission of force,
an aerodynamic design complemented by a carbon
architecture of very high resistance.
A thorough analysis of existing track frames com-
bined with our very strong experience on velo-
dromes have allowed us to develop a versatile but
racy track geometry.
You have a set of rear legs with stainless steel protection struts.
When mounting, tighten the 8 M3*10mm screws to a torque of 1.5Nm. In case of disassembly / reassembly,
put a drop of medium threadlock (type LOCTITE 243™) on each screw.
You will also find the 2 traditional M4*50mm screws for positioning the rear wheel axle.

VERIFICATION BEFORE INSTALLATION

Your frame is now delivered with:
• Its fork and its headset.
• The rear legs with their stainless steel protections.
• Its aluminium clamp (6Nm max).
• The Look pouch.

REAR BRACKET

EN
11