Pedal Housing; 875 Fork; Wheel Mounting; Maintenance - Look 875 MADISON RS Manual De Montaje

PEDAL HOUSING

The LOOK 875 MADISON frames are delivered in
a standard BSA 68mm screwed case to better meet
the extreme forces of the track.

WHEEL MOUNTING

Follow the mounting instructions of the manufacturer.
Please do not exceed a torque of 60Nm on the
frame legs and 40Nm on our fork legs. These are
designed with safety pins.
AFTER-SALES SERVICE
Despite all the care taken in our manufacture, if a
defect appears or if a repair is necessary, contact
your authorised LOOK dealer, supplying the
defective product accompanied by your purchase
invoice and inform it of the malfunction.

875 FORK

The aerodynamic 875 forks have a 43mm offset to
provide a ground clearance adapted to the track.
The profile and the carbon structure has been
studied to provide a good aerodynamic profile-
weight ratio as well as a satisfactory rigidity 100 %
carbon.
Note : For all maintenance operations, we
remind you that the fork must be placed on a
wheel and abnormal wear of the legs that would
be due to abrasion on the ground cannot be
covered by the LOOK warranty.
Attention : The forks are not delivered mounted
on the frames with a pivot of a longer length. You
mustrecut the fork pivot to reach your settings.

MAINTENANCE

Checks and maintenance are important for your
safety and the service life of your product.
An improperly maintained
components can be broken or damaged, which
could result in an accident where you could be
killed, seriously injured or paralysed.
For more information on maintenance obliga-
tions, please visit our website
www.lookcycle.com under the heading WAR-
RANTY POLICY > MAINTENANCE
EN
bicycle and its
13