Rotating Blades Can Cause Damage.
Lids and tampers are not interchangeable between different
container styles, types and sizes. Use the tamper that was
supplied with your blender.
How to Determine the Tamper to be Used with Your
Container
Before using a tamper during the blending process, verify that you have the
correct tamper. If a tamper came with your blender and container at purchase,
it is the correct tamper to use. If a tamper did not come with your container or
you want to determine if a tamper that you already have can be used with your
new container, please see the inspection steps and illustration below.
1.
Place the lid on an empty container.
2.
Remove the lid plug and insert the tamper. The tamper should fit easily
into the opening. It should not come into contact with the blades no matter
where you move the tamper inside the container.
3.
Visually inspect: IF THE TAMPER TOUCHES THE BLADES AT ANY ANGLE,
DO NOT USE THE TAMPER WITH YOUR CONTAINER.
4.
If you do not have the correct tamper for your container, contact Vitamix
Household Customer Service at
64 oz. / 2.0 L (SHORT)
64 oz. / 2.0 L (TALL)
64 oz. / 2 L Short
64 oz. / 2 L Tall
Container uses a
Container uses a
tamper which is
tamper which is
approx. 11 in. long.
approx. 12-½ in. long.
12
t
a m p e r
CAUTION
01.800.436.0110 or 1.440.235.4840
48 oz. / 1.4 L
32 oz. / 0.9 L
48 oz. (1.4 L) and 32 oz. (0.9 L) Containers
use a tamper which is approx. 9-¾ in. long.
.
A non-step tamper
must not be used
with any of the
containers.