Care And Cleaning; Motor Base - Vitamix Aspire Manual De Instrucciones

C
To prepare your new machine for initial use, follow the steps below. This will clean the unit,
and break-in the motor.
1. Fill the container half full with warm water and add a couple drops of liquid dish
washing detergent to the container.
2.
Snap or push the complete 2-Part lid into locked position.
3. Select variable speed 1.
4. Turn machine on and slowly increase speed to variable speed 10, then
to High. Run the machine on High speed for 30 to 60 seconds.
5. Turn off the machine, and rinse and drain the container.
Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash the parts in warm soapy water. Rinse clean under running
water, and dry. Reassemble before use.
IMPORTANT: To ensure continued and effective performance, do not put the container, lid,
lid plug or tamper in the dishwasher.

Motor Base:

1. Unplug the power cord.
Electrical Shock Hazard.
Disconnect power before cleaning the
motor base.
Failure to follow instructions can
cause death or electrical shock.
2.
Wash the outside surface with a damp soft cloth or sponge, which has been rinsed in a
mild solution of liquid detergent and warm water. Do not place the motor base in water.
3.
The centering pad can be removed for more thorough cleaning.
4.
Thoroughly clean the switches so they work freely. They may become sticky from use.
Moisten a cotton swab with a household degreaser or cleaner and clean the grooves
around the switches. Immediately dry all surfaces.
5.
Polish with a soft cloth.
Retainer Nut Loosening
In the event that the retainer nut at the bottom of your container loosens and no longer securely
holds the blade assembly in place, DO NOT CONTINUE TO USE THE CONTAINER. Contact your
local dealer or distributor immediately for instructions.
C
a r e a n d L e a n i n G
WARNING
17