Inverter Models To Be Used With; Bulletin Of Materials - WEG CFW-11 Serie Guia De Instalacion

NOTE!
This guide provides information for the installation of KVDC kit on the inverter
without the suffix W (CFW-11) or W1 (CFW70X) in their description.
The KVDC-CFW11-1 is an optional component of the inverter, therefore, it cannot be sold to
end users or integrators separately.
It must always be installed by the WEG branch or WEG distributor, otherwise, the end user will
lose the warranty for opening the inner parts of the inverter.

1 INVERTER MODELS TO BE USED WITH

Applicable to the following models:
CFW-11 frame sizes A and B.
„
CFW-11/CFW70X frame sizes C and E.
„
CFW-11/CFW70X frame sizes D 200 and 400 V.
„
NOTES!
For models CFW-11 frame size D 690 V and CFW70X frame size D 600 V
„
using the kit KVDC-CFW11-2.
For models CFW70X frame sizes A and B using the kit KVDC-CFW11-3.
„

2 BULLETIN OF MATERIALS

(a) VDCx Electronic Board
(d) Insulation for the board
External Power Supply for Control in 24 V - KVDC-CFW11-1
(b) Metal Spacers
(e) Ribbon-cable 160 mm
(c) Plastic Spacers
(f) Clamp for ribbon-cable
CFW-11/CFW70X | 5