WEG CFW-11 Serie Guia De Instalacion página 23

External Power Supply for Control in 24 V - KVDC-CFW11-1
Step Actions/Instructions
11
Frame sizes D and E
Assembly position of the VDCx board (a).
12
Frame size D Frame size E
- Fit the VDCx board over the three plastic
- Fit the VDCx board on the plastic spacer
spacers and tighten the screw (h) on the
and tighten the two screws (h) on the VDCx
VDCx board on the metal spacers.
board on the metal spacer.
- Fit the 160-mm ribbon cable fitted on the
- Fit the 160-mm ribbon-cable to the XC60A
power board to the XC60A connector (P11) of
connector (P11) of the VDCx board and snap
the VDCx board and snap the plastic cover
the plastic cover (g) on this connector.
(g) on the connector.
CFW-11/CFW70X | 23