Beginning Work With The Machine - Taski swingo 350B Manual De Instrucciones

Beginning work with the machine

Attention:
Always wear slip-resistant shoes and ap-
propriate working clothes when working
with this machine!
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
• Bring the machine into operating po-
A
sition by swinging up the parking
support.
A: For traction batteries; use the
parking support on the right
B: For lithium-ion batteries; use the
parking support on the left
B
• Operate the adjusting lever at the
machine handle and lower the guide
bar slowly until your arms are
stretched out (working position).
• Release the adjusting lever to lock the guide bar.
Manual program start
• Switch the machine on. To do this,
press the main switch button ON/
OFF for 3 seconds.
• The cleaning solution inflow button
ON/OFF is automatically preselect-
ed.
• Press the suction unit ON/OFF but-
ton.
The display lights up.
• Select the intended dosage level by
1 2 3
pressing the cleaning solution inflow
quantity buttons from level 1 to 3.
1. low: for smooth coverings, heavily
furnished
2. medium: for smooth coverings,
open areas
3. high: indirect cleaning and heavily
soiled areas
• Press the operating lever.
The tool is activated.
70
One-button function
• Switch the machine on.
• To do this, press the main switch but-
ton (ON/OFF) for 3 seconds.
The display lights up briefly.
Notice:
The values preset when switching off the
machine are stored and will be automati-
cally activated when restarting the ma-
chine.
Notice:
The preset values can be adjusted at any
time during operation.
Cleaning start
Working with a flexible central steel pillar
• Pull on the adjusting lever (1) and ap-
ply the adjusting lever lock (2).
1
As a result of this lock, the central
steel pillar (3) can be moved freely up
2
and down. The lock is released by
pulling on the adjusting lever again.
3
Working with the scraper
• Pull on the action lever to lower the
scraper.
The scraper is intended above all for
cleaning under tables and benches.
In this way, the residual water can be
scraped up by pulling the machine
backwards and will be sucked up
when traveling forwards again.